Four-way package comparison

Cuisinart Custom 14 vs KitchenAid 13-cup processors

A 14-cup label does not settle whether the Cuisinart Custom 14 DFP-14BCNY or a 13-cup KitchenAid is the better fit. Compare the exact included cutting tools and the manual's task-specific capacity guidance before giving the extra cup much weight. These are package comparisons, not performance rankings.

Cuisinart DFP-14BCNY: large bowl, fixed slice

The Custom 14 pairs a 14-cup bowl and extra-large feed tube with a 4 mm fixed slicing disc, a medium shredding disc and one metal blade used for chopping, mixing and dough. Its manual chart is unusually useful for planning: it recommends up to 14 cups for slicing or shredding produce, but 3 cups for chopped or pureed fruit and vegetables. It also supports yeast dough using the included blade, within listed flour limits; there is no second, separate dough blade in the package.

Choose this configuration when a larger rated bowl, basic slice/shred tasks and one versatile blade line up with the prep you repeat. Do not choose it for variable slice thickness or fine shredding from the supplied tools. Its exact product page gives a 14.8-inch height, which is relevant to cabinet planning but does not replace measuring the installed bowl, cover and feed access.

Read the Cuisinart Custom 14 DFP-14BCNY assessment.

KitchenAid KFP1318: adjustable everyday slicing

The KFP1318's 13-cup bowl is nominally one cup smaller, but its standard package centers on an adjustable slicing disc, a reversible fine/medium shredding disc, a multipurpose blade and a separate dough blade. Its caddy keeps the listed sharp tools together, although it takes storage space. It does not include a dicing kit, French-fry disc or fitted refrigerator lid.

For shoppers who want to vary slice thickness or switch between fine and medium shredding without buying another disc, the KFP1318 has the more flexible everyday disc set. Its published exact height is higher than the DFP-14BCNY's; compare the actual specification and leave room to remove the lid. Read the KFP1318 assessment.

KitchenAid KFP1319 and KFP1320: included specialty cuts

The KFP1319 adds a dicing kit with clean-out tool and a refrigerator lid to the 13-cup family. It does not include a French-fry disc. The KFP1320 supplies those two pieces plus a separate French-fry disc. The extra assemblies make sense only when grid-cut vegetables or the dedicated fry cut recur in your cooking; they add pieces to assemble, wash and store. The manufacturer describes the fry disc for steak fries but does not state an exact cut width in the reviewed materials.

Use the KFP1319 assessment if dicing and a fitted storage lid matter, and the KFP1320 assessment if you need the fry disc in the same package. Neither specialty tool should be inferred from a processor's capacity or from its ordinary multipurpose blade.

A quick decision path

• Start with the DFP-14BCNY if 14-cup rated capacity, a wide feed tube, fixed 4 mm slices and medium shredding cover your regular prep.
• Favor the KFP1318 if adjustable slice thickness and fine/medium shredding matter more than the extra cup or if you want its separate included dough blade.
• Move to KFP1319 for an included dicing kit and refrigerator lid, or KFP1320 when the French-fry disc must be in the box too.

For every option, use the exact model code when comparing listings. Capacity ratings describe bowl size; the manual's task limits, included tool list and your own storage space are what turn that label into a practical choice.

Do not confuse the current Custom 14 with the older PowerPrep Plus DLC-2014CHB. That discontinued 14-cup package has a separate metal dough blade and DOUGH control, while the current Custom 14 uses its included general-purpose blade for manual-supported dough work. More importantly, CPSC’s 2016 blade recall includes Cuisinart model numbers beginning DLC-2014 when fitted with its specified four-rivet blade. Our DLC-2014CHB reference explains the suffix bridge and the recall boundary; it is kept for identification, not purchase matching, because the remedy status of an individual used unit cannot be inferred.