BLACK+DECKER Canada FP1600WC 8-Cup Food Processor review

BLACK+DECKER lists the FP1600WC in Canada as an 8-cup, 450-watt food processor with a continuous-flow chute and pusher. Its product overview names a stainless-steel chopping blade and reversible slice/shred disc, and it lists On, Off and Pulse controls, suction feet and a safety interlock. The exact Canadian page also states a two-year limited warranty. This is an exact-model reference for someone identifying or comparing an existing Canadian unit, not a verified U.S. buying recommendation.

Keep the WC suffix attached to the machine

FP1600WC is not interchangeable on paper with the similarly named FP1600B. A BLACK+DECKER family use-and-care booklet has an 8-cup processor parts diagram that names the FP1600WC specifically for its food pusher and work bowl. The same diagram identifies those parts with different replacement numbers from the FP1600B/FP1700B/FP1800B group. By contrast, its cover does not list FP1600WC among the model codes, and the blade, reversible disc, center shaft and cover entries are assigned to the other suffixes. The exact Canadian product page independently describes a chopping blade and reversible disc, but that is not a complete, suffix-by-suffix parts cross-reference. If you are replacing a bowl or pusher, use the FP1600WC code and the machine's own label rather than ordering by the FP1600B name alone.

There is also a documentation wrinkle: the exact product page’s “Includes” field lists only the 450-watt motor, although its feature list and overview describe the bowl, chute, blade and reversible disc. The booklet diagram supports WC-specific bowl and pusher parts, but does not resolve every item in a new carton. Treat the feature list as a description of the product’s intended tools, not proof that every second-hand unit still has a complete kit.

An 8-cup bowl is not an 8-cup task limit

The rated bowl gives you more room than a small top-down chopper, while the blade-and-disc combination covers both bowl chopping and chute-fed slicing or shredding. Use the chopping blade for the everyday jobs the page names—chopping, mincing and mixing—and use the reversible disc when you want sliced or shredded produce. Its reversible design supplies two operations, not a menu of measured thicknesses: the reviewed page and family booklet do not specify a millimeter cut setting or a separate dicing grid. It is therefore not the right match when a precise slice thickness, dice size or French-fry cut is essential.

The family booklet’s task chart gives a useful warning against equating bowl rating with batch size: it limits liquid in the work bowl to three cups and describes meat processing as no more than two cups of three-quarter-inch cubes, pulsed in five-second intervals. It also recommends short processing bursts, says not to leave the machine unattended, and describes hot-but-not-boiling liquid as acceptable. Those are family-guide instructions rather than measurements printed on the exact FP1600WC product page. The booklet’s parts diagram does name the WC bowl and pusher, so it is relevant evidence, but its cover lists other FP1600/1700/1800 model codes. If a task-specific limit is safety-critical for your exact unit, check the use-and-care booklet supplied with that unit before relying on a family chart.

What “continuous flow” does—and does not—establish

The manufacturer calls the FP1600WC feature a “continuous flow chute with pusher.” That is a useful page-listed chute feature for repeated feeding. The reviewed materials do not describe a separate continuous-feed attachment with its own output receptacle, however. The family guide’s slicing instructions describe food going through the feed chute into the processor’s work bowl. So if you specifically want the dedicated feed-and-attachment arrangement that directs slices into a separate bowl, do not count the words “continuous flow chute” as confirmation of that package; compare a U.S. model whose exact manual and package list document the attachment.

The interlock is another practical part of the routine: the family guide says the bowl and cover must be properly locked before the processor runs. The pusher is used to guide food rather than force it, and the sharp blade and disc should stop completely before the cover is removed. For cleanup, the booklet says removable parts may be hand-washed or placed on the dishwasher’s top rack, away from the utensil basket; the motor base is wiped, not immersed. Because the booklet does not state a numerical continuous-run ceiling for this exact Canadian code, a requirement for a documented 60- or 120-second motor-on interval remains unverified.

Who should compare something else?

For U.S. shopping, the BLACK+DECKER FP4100B is a separately assessed 8-cup package with a reversible slice/shred disc; it is a better starting point for an eligible U.S. purchase search, although its own manual—not FP1600WC’s family booklet—controls its limits. If a true separate continuous-feed attachment is the priority, the Cuisinart FP-9CF has a separately assessed attachment plan that feeds into a separate receptacle, and its nine-cup rating applies to its regular bowl rather than that catch bowl. These are alternatives for different needs, not proof that FP1600WC shares their features or parts.

Bottom line: the Canadian FP1600WC has a useful 8-cup, 450-watt specification and a manufacturer-described chopping-and-reversible-disc tool set. The full included carton is not itemized clearly, its exact suffix matters for parts, and family-manual limits should not be mistaken for a model-cover listing. Keep it as a reference for an existing machine; do not treat it as a U.S. purchase candidate or use its continuous-flow wording as proof of a separate feed attachment.

Sources: BLACK+DECKER Canada’s FP1600WC product page and the FP1600/FP1700/FP1800 family use-and-care booklet (whose parts diagram specifically identifies the FP1600WC bowl and pusher).